Aircraft Mechanic Schools in Aventkura, FL
How to get your A&P Aircraft Mechanic certification in Aventkura, FL; training requirements, eligibility, and more. To earn your A&P Aircraft Mechanic Training Certificate in Aventkura, FL (A&P License in Aventkura, FL), you must attend a Federal Aviation Administration (FAA) certified Aircraft Mechanic School in Aventkura, FL OR have at least 30 months of relevant civilian or military work experience (supervised by a certified aviation mechanic from Aventkura, FL).
The FAA issues the A&P certificates (airframe and powerplant certificates), and A&P mechanics from Aventkura, FL can get either an airframe rating or a power plant rating or both--most aviation mechanics from Aventkura, FL get both. Those who want a certificate with just a single rating and who base their application on practical experience must demonstrate 18 months of work experience applicable to the chosen rating. Learn more about the training and experience requirements to become an A&P mechanic near Aventkura, FL.
After your aircraft mechanic school qualifications are met, you'll be eligible to take the required oral, practical, and written tests. You must pass all these tests within 24 months. The tests cover 43 technical subjects. Typically, tests for one certificate--airframe or power plant--take about 8 hours. (Get more details about the Aircraft A&P Mechanics Tests)
When you pass, you will have earned your FAA A&P mechanic license with airframe and/or powerplant certificates (A&P license in Aventkura, FL), and you'll be on your way to a successful career in aviation maintenance! Learn more about aviation maintenance A&P technician schools near Aventkura, FL.
A&P Mechanic Schools in Aventkura, FL
Although your certificates earned from A&P mechanic schools in Aventkura, FL don't expire, aviation mechanics from Aventkura, FL must remain "current" by meeting several criteria, including completing a minimum of 1,000 hours of hands-on work experience during the previous 24 months (or completing a refresher course) and completing at least 16 hours of additional training every 24 months.
The additional training requirement is usually satisfied by attending manufacturer events or training with outside contractors hired to conduct the training.
Avionics Technician Specialty Training
As an A&P mechanic in Aventkura, FL, if you have the training, qualifications, and tools, the FAA will allow you to work on avionics as well. Avionics technicians are not specifically required to have FAA certification if they received their avionics training in the military or from working for an avionics manufacturer.
See Our Premium Aviation
Schools for Florida
"The Demand is REAL! Train for YOUR aviation maintenance career"
National Aviation Academy - an Aircraft Mechanic School in Tampa Bay Wherever you go in this world, chances are aviation maintenance got you there. And once you arrive, that’s...
Looking for more details?Go to their profile to view:
- School's specializations
- Accreditation/licensing
- Additional locations
- Ratings and reviews
- Staff/personnel
Aircraft Mechanic Trade Schools in Aventkura, FL
Aviation maintenance technicians keep aircraft in the air by inspecting, replacing, and fixing nearly every part of an airplane or helicopter. The term aviation maintenance technician (or A&P Mechanic) is very broad and applies to nearly anyone who works on aircraft in Aventkura, FL.
However, as an aspiring Aviation Mechanic in training, you'll quickly learn that there are several different types of aviation mechanics out there in Aventkura, FL.
First of all, airframe mechanics in Aventkura, FL are licensed to perform repair work on the entire aircraft with the exception of the engine(s), propellers, and instruments. Powerplant mechanics in Aventkura, FL are authorized to work on engines and in some cases, propellers.
Although Aviation A&P Mechanics from Aventkura, FL can earn either an airframe or powerplant certificate, the vast majority of Aviation Mechanic near Aventkura, FL earn both certificates and are hereafter referred to as A&P (airframe and powerplant) mechanics. Avionics technicians work exclusively on aircraft radios, instruments, navigation, weather, traffic, and ground proximity systems. Learn more about aviation maintenance technician jobs.
Aviation Maintenance Technician Career Paths Near Aventkura, FL
As an A&P mechanic in Aventkura, FL, you are eligible to work in a huge variety of settings. You can work as a freelance mechanic at your local airfield in Aventkura, FL, get a job working for a local airport near Aventkura, FL, work for a corporate aviation department maintaining one or a fleet of aircraft in Aventkura, FL, or end up at a major airline working on passenger jets and turboprops.
After three years of operating as an A&P mechanic in Aventkura, FL (with 24 months of hands-on experience), you're eligible to move up and become an inspection authorization mechanic (IA). IA's are A&Ps with the authority to return aircraft to service after certain types of thorough inspections.
Aviation Maintenance Technician Key Points
Aircraft Mechanic Trade Schools in Aventkura, FL must be detail-oriented. Aircraft mechanics perform a variety of complex tasks where mistakes can be costly in terms of money and human life. When the tools are put away, the job is not complete; aircraft mechanics must also be excellent record keepers.
Paperwork for all inspections and work completed must be filed and logged appropriately for each task completed. The larger and more complex the aircraft, the more paperwork. Find out more about aviation maintenance technician training.
Helicopter Pilot's License for Aventkura, FL
A recreational certificate allows pilots to carry one passenger. Among its restrictions, this certificate limits pilots to daytime flights of less than 50 miles. Pilots must be at least 17 to take the test and prove proficiency to a flight instructor who endorses the applicant's logged flight hours.
Helicopter Main Rotor System
The rotor system is the rotating part of a helicopter which generates lift. The rotor consists of a mast, hub, and rotor blades. The mast is a cylindrical metal shaft that extends upwards from and is driven, and sometimes supported, by the transmission. At the top of the mast is the attachment point for the rotor blades called the hub. The rotor blades are then attached to the hub by any number of different methods. Main rotor systems are classified according to how the main rotor blades are attached and move relative to the main rotor hub. There are three basic classifications: rigid, semirigid, or fully articulated.