Loading...

For local resources,
choose a city page in New Hampshire:

Certified Flight Instructor Training New Hampshire NH

Certified Flight Instructor Training in New Hampshire

As a new Commercial pilot, the most important next step in your career is to build flight hours through a top Certified Flight Instructor Training Program near New Hampshire. As a CFI you can do just that - fly, instruct, earn money and gain flight hours. As you train new pilots, you build valuable flight hours, while being compensated for your time.


Through the Certified Flight Instructor Training in New Hampshire, students obtain the knowledge necessary to meet the requirements for FAA exams, and demonstrate through practical and written tests, their ability to operate aircraft as pilot-in-command within the aviation industry. StudentsNew Hampshire will learn the problem-solving skills for flight operations and obtain increased situational awareness with a focus on safety.

Helicopter pilot students gain an understanding of the aerodynamics, components, and flight instruments of the aircraft, specifically those of a Robinson R22 and R44, with the option of Bell 206 B and L series aircraft, including their limitations at high altitude. Instrumentation training will give the student the knowledge to translate information from the aircraft instruments into correct control response in the event of Instrument Meteorological Conditions (IMC).

Helicopter CFI Certificate Program: 30 days and 3 - 30 Flight Hours

The CFI Program Prerequisites:

  • 
Private Pilot Certificate;

  • Commercial Pilot Certificate; and
  • Certified Flight Instructor Certificate.

As a Helicopter Pilot, your Certified Flight Instructor pathway would be to start training for your Commercial Pilot Certificate immediately after obtaining your Private Pilot Certificate. This option is only available to Helicopter Pilots and many schools do not allow this course of training to be taken. I think it is important to gain the skills needed for an Instrument Rating before you begin training as a Commercial Pilot.

Time Received:

  • 180 Hours Dual VFR Flight Training;

  • 5 Hours Dual IFR Flight Training;

  • 15 Solo / Supervised Solo;

  • 113 Hours Ground Instruction; and

  • 100 Hour Pre- and Post- Flight Briefing Instruction.

CFI Training Program Objective

The Certified Flight Instructor Training in New Hampshire is designed to train a student pilot from their beginning initial flight through the completion of their Certified Flight Instructor certificate. The CFI Training in New Hampshire is designed to prepare students to pass both their written and practical FAA examinations through their private pilot, commercial and certified flight instructor certificates.

The CFI Program teaches student pilots how to fly and then helps beginning instructors understand and apply the fundamentals of instruction. The CFI program prepares student pilots for initial entry-level jobs in the industry.


Included in the CFI Training in New Hampshire

Part I - Introduction to High Altitude Flying: With the majority of flight time occurring above 5000ft density altitude (DA), students learn how to determine DA and how high-DA's will affect helicopter performance. Various flight characteristics and weight-and-balance considerations are studied. Training includes the extensive practice of run-on landings, auto-rotations, low rotor RPM, and max performance takeoffs.


Part II - The Mountain Environment: Students learn about how mountain terrain affects environmental conditions. Students are trained in the reconnaissance techniques, as well as, procedures for performing pinnacle and confined area operations at high altitude.

Certified Flight Instructor Careers and Jobs in New Hampshire Fixed Wing CFI

Reports to Chief Flight Instructor – Fixed Wing

Job Description Summary: Flight training schools and programs in New Hampshire are looking for highly motivated CFI’s and MEL’s to instruct for Fixed-Wing programs all over New Hampshire. Qualified Instructors provide flight, simulator, and ground instruction in accordance with Part 61 and 141, FAA regulations, Airmen’s Information Manual, advisory circulars, airport operations, and policies and procedures.

CFI's are responsible for student’s flights, student records, and ensure that each flight course meets course standards, training requirements, and objectives.

Essential Job Functions:

  • Perform those flight instructor duties authorized by the Federal Aviation Regulations in accordance with the approved Training Course Outline.
  • Ensure all students understand and practice all aspects of Upper Limit’s Aviation Safety Program.
  • Regularly schedule each assigned student to ensure satisfactory progress through the course and immediately inform the supervisor of any delays in training or satisfactory progress.
  • Responsible for accurately maintaining all appropriate records to include student training records, student logbooks, and computer records.
  • Ensure that all assigned students as stipulated in the applicable Training Course Outline meet course standards, training requirements, and objectives.Job Description Summary: Flight training schools and programs in California are looking for highly motivated CFI’s and MEL’s to instruct for Fixed-Wing programs all over California. Qualified Instructors provide flight, simulator, and ground instruction in accordance with Part 61 and 141, FAA regulations, Airmen’s Information Manual, advisory circulars, airport operations, and policies and procedures.
  • Initiate stage check requests for assigned students.
  • Responsible for the timely course completion of all flight students assigned, including completion of required paperwork.
  • Monitor the maintenance condition of the training aircraft, and inform maintenance personnel of any questionable items.
  • Recommend curriculum and courseware improvements when appropriate and develop new curriculum or courseware as assigned.
  • File incident reports as necessary to report any observed safety violations, or situations that may affect the safety of flight.
  • Contact and meet with potential new students. Conduct tours of facilities and familiarize customers with Upper Limit’s policies, procedures, and flight training courses.

Attend administrative, standardization, in-service training, and instructor development meetings as assigned.

Minimum Requirements:

  • FAA Certified Flight Instructor and Airplane Single Engine and Multi-Engine Land
  • 200 hours of dual SEL given
  • 50 hours of dual MEL given
  • Must hold a current FAA Class II Medical Certificate
  • C172 S experience with G1000 – minimum 100/hrs
  • Pass ’s initial and on-going drug and alcohol testing program.
  • Aircraft piloting skills, including familiarity with and ability to perform required flight maneuvers and procedures.
  • Knowledge of and ability to apply effective instructional techniques in the classroom and in flight.
  • Knowledge of appropriate Federal Aviation Regulations and related administrative and operational procedures and requirements.
  • Ability to work well under pressure in a fast-paced and noisy environment while exercising sound judgment at all times.
  • Strong customer service skills.
  • Productivity and Performance
  • Perform an average of 40 instructional hours per two-week pay period. Maintain an 80% pass rate for final review and stage checks.

Preferred Qualifications:

  • CFII rating
  • Bravo Airspace experience a plus
  • Density Altitude flying above 5,000 feet
  • Instrument Ground Instructor (IGI) experience a plus
  • Advanced Ground Instruction (AGI) preferred

FAA - A History of Airplane Structures Details for New Hampshire

Airframe structural components are constructed from a wide variety of materials. The earliest aircraft were constructed primarily of wood. Steel tubing and the most common material, aluminum, followed. Many newly certified aircraft are built from molded composite materials, such as carbon fiber. Structural members of an aircraft’s fuselage include stringers, longerons, ribs, bulkheads, and more. The main structural member in a wing is called the wing spar.

Center of Gravity (CG)

The CG is determined by the general design of the aircraft. The designers estimate how far the CP travels. They then fix the CG in front of the CP for the corresponding flight speed in order to provide an adequate restoring moment for flight equilibrium. The Axes of an Aircraft Whenever an aircraft changes its attitude in flight

For local resources,
choose a city page in New Hampshire:

This website uses cookies. By using our website, you agree to our cookie policy and privacy policy.