For local resources,
choose a city page in New Mexico:
Seeking Professional Helicopter Pilot Jobs in New Mexico
To land the top helicopter pilot jobs in New Mexico depends so much upon the "type" of piloting job you are pursuing. Meaning, not all helicopter jobs in New Mexico are the same. Not all helicopter jobs in New Mexico are considered to be the "best-paying jobs." The top commercial helicopter pilot jobs around New Mexico will require set minimum requirements.
Brand new helicopter pilots from New Mexico are very limited in the type of piloting jobs in New Mexico they qualify for because new pilots typically don't have enough flight experience. Most entry-level helicopter pilot jobs in New Mexico require a minimum of 1,200 flight hours. Brand new commercial pilots (those right out of pilot training school) typically have only 220 total flight hours. Two-hundred and twenty hours is not a lot of hours.
Unfortunately, many times there is a 1,000 flight hour gap between completing commercial flight training and having the minimum requirements to land an industry "entry-level" pilot job in New Mexico. Somehow the new commercial helicopter graduate must earn 1,000 additional hours or they don't qualify for the best paying helicopter pilot jobs in New Mexico.
Due to a lack of flight experience, the only pilot job a new commercial pilot can land is the CFI job (Certified Flight Instructors), training new student pilots in New Mexico. The truth is, most professional helicopter pilots start their piloting career as a Certified Flight Instructor (CFI). Their first entry-level helicopter pilot job is a CFI in New Mexico.
In the early stages of a new helicopter pilot career, new pilots from New Mexico are very limited in what helicopter pilot jobs they qualify for. The main problem with hiring brand new commercial pilots is that they do not have enough flight hours. Typically, a brand new commercial helicopter pilot in New Mexico has earned 220 flight hours.
Essentially, the process of securing a commercial pilot rating will net a newly rated pilot with 220 total flight hours, and 100 of those hours are "pilot in command" hours, also known as "PIC" hours. The point is, the new commercial helicopter pilot in New Mexico don't qualify for one of the good-paying pilot jobs in New Mexico, therefore the only piloting jobs available are CFI jobs.
Commercial helicopter pilots only have a couple of ways to earn enough PIC hours to land the best-paying commercial piloting job in New Mexico, and most pilots earn their required hours as Certified Flight Instructors.
Researching Helicopter Pilot Salary?Here are some of the top-paying helicopter pilot jobs in New Mexico
Law Enforcement Pilot: Police Helicopter Pilots in New Mexico are typically police officers and commercial helicopter pilots. The typical law enforcement pilot job requirements are simple and clear: Must be a US citizen, pass a background check, and has either attended and graduated from a police academy or is willing to participate in and graduate.
The flight requirements of helicopter pilots seeking a job as a law enforcement helicopter pilot in New Mexico include a Commercial Instrument Rotor-wing Certificate, Class II Flight Physical, a minimum of 1,200 total times, 800 PIC hours, and 700 turbine hours.
Emergency Medical Services Helicopter Pilot: Professional helicopter pilots seeking a full-time job piloting for Emergency Medical Services (EMS) companies in New Mexico need to be the best of the best. Keep in mind, EMS helicopter pilots are "the best of the best" and the "top dogs" in the aviation industry, therefore most employers give preference to pilots with previous EMS experience with VFR proficiency.
Strong communication skills are a must. Desire to being an integral member of a medical-based team is a must. Job seekers must be able to perform strenuous physical tasks such as lifting and carrying weight up to 90 lbs.
Other helicopter pilot requirements include a current FAA Commercial Certificate, Class II Medical Certificate, Helicopter Instrument Rating, and it is preferred that pilot candidates possess ATP helicopter rating and have recent IFR experience.
Utility Inspection Pilot: Utility Inspect Helicopter Pilots in New Mexico must be able to survey powerlines using LiDAR and photographic/video equipment to inspect and document the condition of power poles. Top utility companies are looking for helicopter pilots with extraordinary helicopter experience flying in and around a "wire environment" (utility lines).
Helicopter pilots seeking employment with utility companies must demonstrate and prove their skills to operate a helicopter safely and in a professional manner. To land the best paying utility jobs, they must prove their ability to follow and comply with all Federal (FAA), State, and local regulations. Employers realize that the best utility helicopter pilots have established their ability to work independently and with a team.
Typically, helicopter pilot job candidates need a minimum of 3000 hours as Pilot In Command, a minimum of 300 hours in a turbine, flying utility inspections around power lines with photography is preferred. Job candidates should have FAA commercial license, current medical, clean driving record, clean background check, clean drug test, and no accidents or incident reports.
Charter Tour Pilot: The top helicopter tour companies typically recruit full-time helicopter pilots from New Mexico to fly public tours. Job seekers need a commercial pilot rating along with CFI and/or CFII.
Helicopter tour pilots must demonstrate their skills in operating a helicopter safely and in a professional manner. To land the best paying utility jobs, helicopter pilot candidates must prove their ability to follow and comply with all Federal (FAA), State, and local regulations.
Tour helicopter pilots have training in a Robinson R44 and Robinson R66, and turbine hours is preferred or considered an advantage. Helicopter tour pilots need a minimum of 250-1,000 hours and should be qualified for aerial photography, aerial surveys, and sightseeing tour jobs.
Certified Flight Instructor: Helicopter pilots from New Mexico looking to land the best flight instructor jobs must have plenty of hours in a Robinson R22 and R44 and R66 Helicopters. Strangely enough, the highest-paid flight instructors also conduct sightseeing tours as long as the pilot meets specific hourly requirements.
Job candidates need to be able to operate as independent contractors working on an hourly basis, flying anywhere from 5 to 25 hours a week.
Flight training job candidates need the following to be current: FAA Commercial Rotorcraft Certificate, Instrument Rotorcraft Rating, Flight Instructor Certificate, (“Instrument” rated Flight Instructor Rating usually preferred), Class II Medical Certificate, and SFAR CFI Endorsement for R22 and R44
Minimum flight experience - a minimum of 250 hours total time in a helicopter, and preferably 150 of those hours in Robinson Rotorcraft.
FAA - A History of Airplane Structures Facts for New Mexico
Airplane structural members are designed to carry a load or to resist stress. In designing an aircraft, every square inch of wing and fuselage, every rib, spar, and even each metal fitting must be considered in relation to the physical characteristics of the material of which it is made. Every part of the aircraft must be planned to carry the load to be imposed upon it.
Aviation Facts - Stability and Control of an Aircraft
An aircraft must have sufficient stability to maintain a uniform flightpath and recover from the various upsetting forces. Also, to achieve the best performance, the aircraft must have the proper response to the movement of the controls. Control is the pilot action of moving the flight controls, providing the aerodynamic force that induces the aircraft to follow a desired flightpath. When an aircraft is said to be controllable, it means that the aircraft responds easily and promptly to movement of the controls. Different control surfaces are used to control the aircraft about each of the three axes. Moving the control surfaces on an aircraft changes the airflow over the aircraft’s surface. This, in turn, creates changes in the balance of forces acting to keep the aircraft flying straight and level.