Aircraft Mechanic Schools in Edmond, OK
How to get your A&P Aircraft Mechanic certification in Edmond, OK; training requirements, eligibility, and more. To earn your A&P Aircraft Mechanic Training Certificate in Edmond, OK (A&P License in Edmond, OK), you must attend a Federal Aviation Administration (FAA) certified Aircraft Mechanic School in Edmond, OK OR have at least 30 months of relevant civilian or military work experience (supervised by a certified aviation mechanic from Edmond, OK).
The FAA issues the A&P certificates (airframe and powerplant certificates), and A&P mechanics from Edmond, OK can get either an airframe rating or a power plant rating or both--most aviation mechanics from Edmond, OK get both. Those who want a certificate with just a single rating and who base their application on practical experience must demonstrate 18 months of work experience applicable to the chosen rating. Learn more about the training and experience requirements to become an A&P mechanic near Edmond, OK.
After your aircraft mechanic school qualifications are met, you'll be eligible to take the required oral, practical, and written tests. You must pass all these tests within 24 months. The tests cover 43 technical subjects. Typically, tests for one certificate--airframe or power plant--take about 8 hours. (Get more details about the Aircraft A&P Mechanics Tests)
When you pass, you will have earned your FAA A&P mechanic license with airframe and/or powerplant certificates (A&P license in Edmond, OK), and you'll be on your way to a successful career in aviation maintenance! Learn more about aviation maintenance A&P technician schools near Edmond, OK.
A&P Mechanic Schools in Edmond, OK
Although your certificates earned from A&P mechanic schools in Edmond, OK don't expire, aviation mechanics from Edmond, OK must remain "current" by meeting several criteria, including completing a minimum of 1,000 hours of hands-on work experience during the previous 24 months (or completing a refresher course) and completing at least 16 hours of additional training every 24 months.
The additional training requirement is usually satisfied by attending manufacturer events or training with outside contractors hired to conduct the training.
Avionics Technician Specialty Training
As an A&P mechanic in Edmond, OK, if you have the training, qualifications, and tools, the FAA will allow you to work on avionics as well. Avionics technicians are not specifically required to have FAA certification if they received their avionics training in the military or from working for an avionics manufacturer.
See Our Premium Aviation
Schools for Oklahoma
"Training the next generation of pilots and technicians!"
Welcome to Spartan College of Aeronautics and TechnologyCelebrating our 94th anniversary, Spartan College of Aeronautics and Technology has trained more than 100,000 pilots and...
Looking for more details?Go to their profile to view:
- School's specializations
- Accreditation/licensing
- Additional locations
- Ratings and reviews
- Staff/personnel
Aircraft Mechanic Trade Schools in Edmond, OK
Aviation maintenance technicians keep aircraft in the air by inspecting, replacing, and fixing nearly every part of an airplane or helicopter. The term aviation maintenance technician (or A&P Mechanic) is very broad and applies to nearly anyone who works on aircraft in Edmond, OK.
However, as an aspiring Aviation Mechanic in training, you'll quickly learn that there are several different types of aviation mechanics out there in Edmond, OK.
First of all, airframe mechanics in Edmond, OK are licensed to perform repair work on the entire aircraft with the exception of the engine(s), propellers, and instruments. Powerplant mechanics in Edmond, OK are authorized to work on engines and in some cases, propellers.
Although Aviation A&P Mechanics from Edmond, OK can earn either an airframe or powerplant certificate, the vast majority of Aviation Mechanic near Edmond, OK earn both certificates and are hereafter referred to as A&P (airframe and powerplant) mechanics. Avionics technicians work exclusively on aircraft radios, instruments, navigation, weather, traffic, and ground proximity systems. Learn more about aviation maintenance technician jobs.
Aviation Maintenance Technician Career Paths Near Edmond, OK
As an A&P mechanic in Edmond, OK, you are eligible to work in a huge variety of settings. You can work as a freelance mechanic at your local airfield in Edmond, OK, get a job working for a local airport near Edmond, OK, work for a corporate aviation department maintaining one or a fleet of aircraft in Edmond, OK, or end up at a major airline working on passenger jets and turboprops.
After three years of operating as an A&P mechanic in Edmond, OK (with 24 months of hands-on experience), you're eligible to move up and become an inspection authorization mechanic (IA). IA's are A&Ps with the authority to return aircraft to service after certain types of thorough inspections.
Aviation Maintenance Technician Key Points
Aircraft Mechanic Trade Schools in Edmond, OK must be detail-oriented. Aircraft mechanics perform a variety of complex tasks where mistakes can be costly in terms of money and human life. When the tools are put away, the job is not complete; aircraft mechanics must also be excellent record keepers.
Paperwork for all inspections and work completed must be filed and logged appropriately for each task completed. The larger and more complex the aircraft, the more paperwork. Find out more about aviation maintenance technician training.
Helicopter Facts for Edmond, OK
Helicopters have been widely adopted by the military since their first appearance during the Korean War. During the Vietnam War, they became the preferred platforms for transporting troops and evacuating wounded; in the Persian Gulf conflict helicopter gunships provided air cover for advancing tanks.
FAA - A History of Aircraft Structures Factoid for Edmond, OK
The airframe of a fixed-wing aircraft consists of five principal units: the fuselage, wings, stabilizers, flight control surfaces, and landing gear. Helicopter airframes consist of the fuselage, main rotor and related gearbox, tail rotor (on helicopters with a single main rotor), and the landing gear.