For local resources,
choose a city page in New York:
Fixed Wing Pilot Jobs in New York
The most respected fixed-wing pilots from New York are able to plan their flights and ensure the airplane is safe and operable, and a lot more. Top paid fixed-wing pilots in New York also work to make sure the airplane's cargo has been loaded properly, and that weather conditions are safe and the aircraft's engine is running perfectly.
Professional fixed-wing pilots looking for top-paying pilot jobs around ~regions~are expected to file flight plans with air traffic controllers and they must be able to modify flight plans in mid-flight due to the ever-changing weather conditions or aircraft performance issues.
Why do some fixed-wing pilots land all the best-paying fixed-wing pilot jobs in New York? Easy, they have the experience, the flight hours, they meet all the requirements, AND they are able to do takeoffs and landings and all the most difficult aspects of professional piloting (transporting people or cargo by airplane).
Most New York-based aviation employers hiring fixed-wing pilots for the top-paying fixed-wing pilot jobs in New York look for the ability to work well with others under pressure while showing the ability to coordinate and work flawlessly with copilots and flight engineers, and even flight attendants.
FAA - A History of Airplane Structures Facts for New York
There are five major stresses to which all aircraft are subjected: Tension. Tension is the stress that resists a force that tends to pull something apart. [Figure 1-14A] The engine pulls the aircraft forward, but air resistance tries to hold it back. The result is tension, which stretches the aircraft. The tensile strength of a material is measured in pounds per square inch (psi) and is calculated by dividing the load (in pounds) required to pull the material apart by its cross-sectional area (in square inches).
Aviation Facts - Primary Flight Controls
The primary controls are the ailerons, elevator, and the rudder, which provide the aerodynamic force to make the aircraft follow a desired flightpath. The flight control surfaces are hinged or movable airfoils designed to change the attitude of the aircraft by changing the airflow over the aircraft’s surface during flight. These surfaces are used for moving the aircraft about its three axes.