Loading...

Certified Flight Instructor Training Indiana IN

Certified Flight Instructor Training in Indiana

As a new Commercial pilot, the most important next step in your career is to build flight hours through a top Certified Flight Instructor Training Program near Indiana. As a CFI you can do just that - fly, instruct, earn money and gain flight hours. As you train new pilots, you build valuable flight hours, while being compensated for your time.


Through the Certified Flight Instructor Training in Indiana, students obtain the knowledge necessary to meet the requirements for FAA exams, and demonstrate through practical and written tests, their ability to operate aircraft as pilot-in-command within the aviation industry. StudentsIndiana will learn the problem-solving skills for flight operations and obtain increased situational awareness with a focus on safety.

Helicopter pilot students gain an understanding of the aerodynamics, components, and flight instruments of the aircraft, specifically those of a Robinson R22 and R44, with the option of Bell 206 B and L series aircraft, including their limitations at high altitude. Instrumentation training will give the student the knowledge to translate information from the aircraft instruments into correct control response in the event of Instrument Meteorological Conditions (IMC).

Helicopter CFI Certificate Program: 30 days and 3 - 30 Flight Hours

The CFI Program Prerequisites:

  • 
Private Pilot Certificate;

  • Commercial Pilot Certificate; and
  • Certified Flight Instructor Certificate.

As a Helicopter Pilot, your Certified Flight Instructor pathway would be to start training for your Commercial Pilot Certificate immediately after obtaining your Private Pilot Certificate. This option is only available to Helicopter Pilots and many schools do not allow this course of training to be taken. I think it is important to gain the skills needed for an Instrument Rating before you begin training as a Commercial Pilot.

Time Received:

  • 180 Hours Dual VFR Flight Training;

  • 5 Hours Dual IFR Flight Training;

  • 15 Solo / Supervised Solo;

  • 113 Hours Ground Instruction; and

  • 100 Hour Pre- and Post- Flight Briefing Instruction.

CFI Training Program Objective

The Certified Flight Instructor Training in Indiana is designed to train a student pilot from their beginning initial flight through the completion of their Certified Flight Instructor certificate. The CFI Training in Indiana is designed to prepare students to pass both their written and practical FAA examinations through their private pilot, commercial and certified flight instructor certificates.

The CFI Program teaches student pilots how to fly and then helps beginning instructors understand and apply the fundamentals of instruction. The CFI program prepares student pilots for initial entry-level jobs in the industry.


Included in the CFI Training in Indiana

Part I - Introduction to High Altitude Flying: With the majority of flight time occurring above 5000ft density altitude (DA), students learn how to determine DA and how high-DA's will affect helicopter performance. Various flight characteristics and weight-and-balance considerations are studied. Training includes the extensive practice of run-on landings, auto-rotations, low rotor RPM, and max performance takeoffs.


Part II - The Mountain Environment: Students learn about how mountain terrain affects environmental conditions. Students are trained in the reconnaissance techniques, as well as, procedures for performing pinnacle and confined area operations at high altitude.

Apply TodayLet Our Aviation Experts Help You
Get Matched
With the BEST
School/Training for YOU!
INQUIRE HERE

Certified Flight Instructor Careers and Jobs in Indiana Fixed Wing CFI

Reports to Chief Flight Instructor – Fixed Wing

Job Description Summary: Flight training schools and programs in Indiana are looking for highly motivated CFI’s and MEL’s to instruct for Fixed-Wing programs all over Indiana. Qualified Instructors provide flight, simulator, and ground instruction in accordance with Part 61 and 141, FAA regulations, Airmen’s Information Manual, advisory circulars, airport operations, and policies and procedures.

CFI's are responsible for student’s flights, student records, and ensure that each flight course meets course standards, training requirements, and objectives.

Essential Job Functions:

  • Perform those flight instructor duties authorized by the Federal Aviation Regulations in accordance with the approved Training Course Outline.
  • Ensure all students understand and practice all aspects of Upper Limit’s Aviation Safety Program.
  • Regularly schedule each assigned student to ensure satisfactory progress through the course and immediately inform the supervisor of any delays in training or satisfactory progress.
  • Responsible for accurately maintaining all appropriate records to include student training records, student logbooks, and computer records.
  • Ensure that all assigned students as stipulated in the applicable Training Course Outline meet course standards, training requirements, and objectives.Job Description Summary: Flight training schools and programs in California are looking for highly motivated CFI’s and MEL’s to instruct for Fixed-Wing programs all over California. Qualified Instructors provide flight, simulator, and ground instruction in accordance with Part 61 and 141, FAA regulations, Airmen’s Information Manual, advisory circulars, airport operations, and policies and procedures.
  • Initiate stage check requests for assigned students.
  • Responsible for the timely course completion of all flight students assigned, including completion of required paperwork.
  • Monitor the maintenance condition of the training aircraft, and inform maintenance personnel of any questionable items.
  • Recommend curriculum and courseware improvements when appropriate and develop new curriculum or courseware as assigned.
  • File incident reports as necessary to report any observed safety violations, or situations that may affect the safety of flight.
  • Contact and meet with potential new students. Conduct tours of facilities and familiarize customers with Upper Limit’s policies, procedures, and flight training courses.

Attend administrative, standardization, in-service training, and instructor development meetings as assigned.

Minimum Requirements:

  • FAA Certified Flight Instructor and Airplane Single Engine and Multi-Engine Land
  • 200 hours of dual SEL given
  • 50 hours of dual MEL given
  • Must hold a current FAA Class II Medical Certificate
  • C172 S experience with G1000 – minimum 100/hrs
  • Pass ’s initial and on-going drug and alcohol testing program.
  • Aircraft piloting skills, including familiarity with and ability to perform required flight maneuvers and procedures.
  • Knowledge of and ability to apply effective instructional techniques in the classroom and in flight.
  • Knowledge of appropriate Federal Aviation Regulations and related administrative and operational procedures and requirements.
  • Ability to work well under pressure in a fast-paced and noisy environment while exercising sound judgment at all times.
  • Strong customer service skills.
  • Productivity and Performance
  • Perform an average of 40 instructional hours per two-week pay period. Maintain an 80% pass rate for final review and stage checks.

Preferred Qualifications:

  • CFII rating
  • Bravo Airspace experience a plus
  • Density Altitude flying above 5,000 feet
  • Instrument Ground Instructor (IGI) experience a plus
  • Advanced Ground Instruction (AGI) preferred

FAA - A History of Fixed Wing Structures Info for Indiana

The work of all of these men was known to the Wright Brothers when they built their successful, powered airplane in 1903. The first of its kind to carry a man aloft, the Wright Flyer had thin, cloth-covered wings attached to what was primarily truss structures made of wood. The wings contained forward and rear spars and were supported with both struts and wires. Stacked wings (two sets) were also part of the Wright Flyer.

Helicopter Main Rotor System

The rotor system is the rotating part of a helicopter which generates lift. The rotor consists of a mast, hub, and rotor blades. The mast is a cylindrical metal shaft that extends upwards from and is driven, and sometimes supported, by the transmission. At the top of the mast is the attachment point for the rotor blades called the hub. The rotor blades are then attached to the hub by any number of different methods. Main rotor systems are classified according to how the main rotor blades are attached and move relative to the main rotor hub. There are three basic classifications: rigid, semirigid, or fully articulated.

For local resources,
choose a city page in Indiana: